Which gas holder to choose for a private home, how to calculate the required volume of the LPG tank. Gas tank for a private home: how to choose, installation and review of the best options for a country house Installing a gas tank on a summer cottage

In the case of autonomous gasification of a house, the continuity of gas supply largely depends on the volume of the gas tank used in the system. Therefore, specialists from companies involved in the development of gas supply for country houses and cottages calculate the correct gas tank volume so as not to leave your clients without normal heating during the cold season.

Capacity of gas tanks

The average size of gas storage facilities for private residential properties varies from 2.7 cubic meters. m up to 10 cubic meters m. However, such figures are not the limit. For small industrial enterprises, the tank capacity can be up to 200 cubic meters. m. Even more striking in their scale are the gas tanks that are used at large gas distribution stations. In some cases, the volume of such storage reaches 100 thousand cubic meters. m.

Naturally, for country cottages such sizes are absolutely useless, and usually to solve all the needs in terms of heating, cooking, pool heating, etc., a tank with a capacity of up to 10 cubic meters of gas is quite enough, even if we are talking about large 2 or 3-storey villas.

Gas holder with a volume of 10 cubic meters. meters.

When choosing a gas storage capacity for your home, you need to consider one important nuance. It is never filled to capacity, and the usable volume is only 85%. Therefore, it is necessary to calculate the overall dimensions with a certain margin.

Choosing the volume of a gas tank for a country house

The flow rate and, accordingly, the total capacity of the gas tank is influenced by several factors, and this is not only the total area of the heated room, but also the average annual temperature, the number of people living, the degree of insulation of the building and the power of the heating equipment.

The frequency of its refilling depends on the size of the gas storage facility. However, if we are not talking about a seasonal country house, but about a permanent place of residence, then in any case the tank will have to be refilled at least twice a year. This is due to the fact that summer and winter gas mixtures have different proportions of propane and butane, therefore, in order not to freeze in winter, it is necessary to use the gas composition intended for this period.

Refill your volumes of gas tanks at the trusted company Promtekhgaz

Calculation of optimal capacity

Typically, the volume of a gas tank is calculated by specialists from a company that develops an autonomous gas supply system. However, if desired, homeowners can determine this parameter themselves.

The volume of the gas holder depends on the number of devices consuming gas, etc.

The cost of home gas storage facilities depending on their volume

Taking into account the volume of the gas tank, on average gas tanks are in the following price range (excluding installation of equipment and gasification of a residential property):

2.7 cu. m (area 120 sq. m) – 125 thousand rubles;
4.85 cu. m (260 sq. m) – 140-190 thousand rubles;
6.4 cu. m (500 sq. m) – 180-240 thousand rubles;
9.15 cu. m (850 sq. m) – 255-320 thousand rubles;

As a rule, when determining the size of the tank, the entire heating season (6 cold months) is taken into account so that one full filling is enough for all needs during the winter period, taking into account the climatic conditions of a particular region. Therefore, knowing the price of propane-butane and the size of your gas storage facility, you can determine the cost of the heating season for yourself.

Simple calculations show that with a gas tank volume of 3000 liters and a gas price of 14.3 rubles/l in the cold season, you will have to spend approximately 43 thousand rubles on heating if you refuel at the Promtekhgaz company. A relatively small price to pay for the right to enjoy all the benefits of a continuous gas supply and the opportunity to be in a warm room when there is severe frost outside.

You will find more articles about autonomous gasification in the corresponding section.

You can solve the problem of gasification and create an autonomous heating system by installing a gas tank for a private home. Several important nuances will need to be taken into account: the operating principle of the device, the type of design, as well as the requirements for the installation and its cost-effectiveness compared to other alternative fuels.

Types of gas tanks for a country house

A gas tank is not only a storage facility for liquefied gas, as the average consumer sometimes thinks. In fact, this is an entire station that processes liquefied gas into fuel suitable for boilers and other gas equipment. The main advantage of the installation is absolute safety, provided that it is installed correctly and safety requirements are met.

The operating principle of the gas holder is as follows:

Liquid gas is pumped into the container.
Evaporation of a gaseous substance from the surface occurs.
Using the reactor, a stable pressure is created in the gas distribution system.
Gas enters a residential building.

As a rule, a gas tank is installed for a cottage, country house or summer house where they plan to live during the entire heating season. When choosing a gas supply station, first of all you need to take into account that there are several types of devices intended for different purposes and having certain design features.

Ground gas holder

Ground-based gas tanks are very popular in EU countries, since their installation does not require global installation work. Installation is quick and does not require additional material investments.

For Russia, above-ground gas tanks (gas holders) are not a good choice due to severe cold in the winter. A decrease in temperature affects the rate of evaporation of liquefied gas in the gas tank.

If it is necessary to install a ground storage facility, taking into account the weather conditions in the Russian Federation, it will be necessary to additionally install special evaporators, as well as spend money on insulating the tank body. To continuously supply gas to several large houses or an entire cottage community, spherical gas tank structures with a total capacity of up to 6000 m³ are used.

Underground gas tank

An underground gas tank ensures optimal performance by creating the necessary conditions for sufficient evaporation from the surface. The advantages include the following:

Large area of liquid evaporation (mirrors).
The maximum tank filling volume is enough to fill the storage once a year to supply one or more buildings with gas.
Conditions are provided for constant gas evaporation, without the use of additional devices. The housing is installed in the ground below the freezing point.

Underground tanks are buried in the ground, which has virtually no effect on the appearance of the site and does not spoil the beauty of the landscape design.

An underground gas tank can be used simultaneously for a cottage community of several private houses. The organization installing the container must take measures to prevent rupture of the walls as a result of high pressure on the body.

Mobile gas holder

Mobile storage is popular due to the ability to quickly install and transport the station. The small size of the gas holder allows it to be installed on a regular car trailer and connected directly to the gas exhaust system of the house.

The transport gas tank kit includes:

Reducer with the ability to adjust the gas outlet pressure.
Pressure gauge.
Gas level indicator in the tank.

The maximum fuel volume is no more than 500 liters, which allows the gas holder to be used for a 100 m² home. The main advantage of the mobile station is the connection speed, which takes only 1-2 minutes. A mini gas holder is most often used for a small dacha where people live in the winter.

A small mobile gas tank for a cottage is refueled directly at gas stations, which allows the owner to choose a gas station with the optimal gas price.

Vertical gas holder

Vertical gas tanks are not widely used due to their small evaporation surface and correspondingly low productivity. To increase efficiency, two tanks are often installed at once, connected to one gearbox.

The advantage of a vertical tank is the stability of pressure, independent of the degree of filling of the storage facility with liquefied gas. Italian manufacturers have slightly increased the productivity of the devices they produce by equipping the tanks with liquid heaters and evaporators. Optimally suitable for a house of 150 m².

Horizontal gas tank

Horizontal metal containers are used to supply gas to large houses, one or several at a time. The advantage of the devices is high performance as long as the tank is at least half full.

After reducing the volume of blue fuel by more than ⅔, the efficiency of the devices decreases sharply. To stabilize operation and gas production, the installation of a special reducer is required. Horizontal containers are recommended for use in homes of 200 - 250 m².

How to choose a gas tank for a site

Autonomous heating of a private house with liquefied gas from a gas holder is a fairly economical, safe and reliable solution, especially in the absence of a central gas supply. When deciding to use this type of heating, the owner of a private country house will need to make several important decisions regarding the following points:

The efficiency of a gas holder compared to electricity and other types of fuel.
Required tank volume.
Type of container.
Installation cost, etc.

The productivity and efficiency of the station depends on the correct answers to these questions.

How much does it cost to heat a house with a gas tank?

Since it is almost impossible to calculate the gas demand for an individual house from a gas tank in each specific case, for example, you can carry out calculations for a house of 200 m². This is done as follows:

The average gas consumption per month will be about 3.3 liters per m².
During the heating season (6 months) you will need to spend 20 liters. fuel per m².
Total costs will be 4000 l.
The cost for 1 liter ranges from 12 to 15 rubles/l.
During the heating season you will have to spend 60,000 rubles, or 10,000 rubles/month.

The consumption of gas from a gas holder for heating a house depends on the number of appliances powered by this fuel (dispensers, stoves, etc.), as well as.

How to calculate the volume of a gas tank

Selecting a gas holder for a cottage must begin with choosing the appropriate tank volume. In this case, certain installation features should be taken into account. To heat a house of 200 m², 4000 liters are required.

The installation volume is selected depending on the configuration.

The volume of a horizontal gas tank should be 15-20% larger than the minimum required amount of fuel to ensure sufficient performance after the amount of fuel is reduced by ⅔.
The volume of vertical storage is selected with a small margin, approximately 10%. Design features allow you to maintain stable pressure until the tank is completely empty.

Accurate calculations about the required volume of the station should be made by the organization involved in the installation of gas tank heating systems.

Which gas holder is better to use – vertical or horizontal?

To install a gas holder in a small dacha, it is better to choose a mobile or vertical station. Generally, there is no need to install a horizontal tank for houses smaller than 100 m². Vertical gas tanks are less productive, but maintain stable pressure in the gas supply system.

In houses starting from 150 m², it is preferable to install horizontal stations. They are capable, if necessary, of providing a sufficient amount of gas to several buildings at once.

In addition to the technical characteristics, the design features of the site should be taken into account: the area and configuration of the local area. Since the minimum distance from a gas tank to a residential building is at least 10 m, sometimes technical conditions do not allow the installation of horizontal storage, even if this is necessary.

In the latter case, autonomous gasification of LPG is carried out using two vertical tanks connected to one gearbox.

The cost of installing a gas tank on the site

The full cost of connecting and introducing gas from the gas tank into the house depends on the contractor, the cost of building materials and the region where construction is planned.

To calculate the cost of installation you will need to calculate the following:

The cost of a gas tank for a private house.
Preparatory work.
Installation and connection.

The cost of the station without components will be from 100-190 thousand rubles. Installing a gas holder at a dacha on a turnkey basis will cost around 300,000 rubles. (including tank).

Additional costs are associated with anodic-cathodic protection of the tank from corrosion. The costs are recouped by increasing the service life of the product several times.

Is it worth buying a used gas tank?

The weak point of all gas tanks is their body, which is subject to constant pressure. In some modern high-capacity gas supply stations, an internal voltage of 18 atm is created.

The service life of a gas tank directly depends on the ability of the housing to maintain tightness. Considering that metal is negatively affected by the environment, used gas containers are extremely unreliable when reinstalled.

The obvious disadvantages of purchasing a used gas tank are the following:

Impossibility of installation in accordance with safety requirements.
High probability of malfunction.
Short service life.

Relatively recently, a service for leasing a gas tank has appeared. This made it possible to use the station in cases where the building is planned to be heated for a short time.

When purchasing a used station, you can order diagnostics of gas tank equipment. This service will allow you to accurately determine the condition of the tank and indicate possible malfunctions.

Is it possible to install a gas tank on a private plot?

Safety rules for the operation of liquid gas storage stations allow the use of gas tanks and their installation in a private area, subject to compliance with the recommendations of the industrial safety regulations. In particular, the following is stipulated:

There should be no increased gas pressure in the system and no possibility of oxygen entering.
The equipment must be grounded. If lightning strikes the tank or static electricity appears, an explosion will be avoided.
Availability of working sensors that indicate the presence of a gas leak.

By following these instructions, the risk of a gas tank explosion is reduced to almost zero.

Where should the gas tank be located on the site?

The location of the liquefied gas storage tank is located taking into account several important factors.

Free access to the tank - the tank must be refilled 1-2 times a year. Vehicles must have free access to the tank. In this case, the horizontal gas tank is positioned in such a way that the structure does not pass under the road and does not experience loads.
Fire safety requirements. The storage container is placed in such a way that there is at least 10 meters to the buildings. The pipeline is laid in the ground and goes either into the basement, or, if there is no such space, directly in front of the building.
Requirements for placing a gas tank from a neighboring land plot. The PB prescribes maintaining a standard distance from a neighboring house of 20 m (volume from 20-50 m³), or 10 m (no more than 10 m³).
The distance to the road must be at least 5 m.

Safety standards for installing a gas tank

Standards and procedures have been developed that describe in detail the requirements for the installation of gas tanks, as well as the supply gas pipeline. Compliance with the rules is necessary for safe operation of the device.

Registration. It is required to register a gas tank with Rostekhnadzor only if the installation is not certified and there are no operating permits. When purchasing factory equipment, a package of necessary documents is provided with it, so there is no need for additional registration. Certification documents and an operating permit are required for installation.
Location. SNIP for installing a gas tank on a site requires compliance with the following instructions. The top point of the tank should not be higher than 60 cm from the ground surface. The container must be installed on special feet located on the body.
After installation, it is necessary to ensure visual accessibility to the plate with the serial number and series of the tank.
If there is a high probability of “current flow” and static electricity in the ground area, it is necessary to protect the steel structure of the tank from corrosion using special protection.
The standards and rules for installing a vertical gas tank require deepening most of the tank below the freezing level of the soil.

It is better to locate the gas tank on a site relative to the house, away from transport access and pedestrian paths, on the side of the room in which the boiler is located.

What documents are required to install a gas tank?

According to current legislation, it is not necessary to obtain permission from Rostechnadzor to install a gas tank. Rostekhnadzor registers exclusively industrial installations with a capacity of over 10 m³. The owner of the site does not even have to inform the neighbors about the installation of a gas tank, of course, provided that the construction will not take place on their land territory.

To avoid further misunderstandings, it is recommended to have the following package of documents:

Certificate of quality.
Permission to operate.

The advantages of purchasing a turnkey gas holder are that the organization taking responsibility for the installation, if necessary, collects all the necessary documentation and subsequently continues to maintain the station and refuel it.

What kind of foundation is needed?

Must be full-bodied. When pouring the foundation, it is important to ensure that there are no voids. Special vibrating machines are used to compact concrete.
The thickness of the slab is the minimum acceptable size of 15-20 cm.
Reinforcement - it is recommended to strengthen the foundation by first making a metal knitted frame from steel reinforcement.

How to supply gas from a gas tank to a house

The distance to the foundation of the building is at least 2 meters.
The intersection of communications and gas pipes is 2 m in height.
The depth of the gas pipeline is at least 1.5 m.
A slope of 1 cm is allowed per m.
All metal parts in contact with the ground are subject to additional waterproofing.
Be sure to install a condensate collector.
The base input must be factory-made and have mandatory certification.
The location of communications in a private house, taking into account the installation of a gas holder, should begin from the ground floor. A gas boiler is installed at the inlet, from which the pipe diverges to the remaining gas consumption units.

Which pipe to take gas to the house?

For installation in the ground, exclusively polyethylene pipe PE 100 is used.
The procedure for carrying out installation work includes the use of permanent connections, using electrofusion and butt welding.

To carry out the work, a polyethylene pipe specially designed for liquefied carbon gas is used.

Our company is engaged in the installation of turnkey steel gas tanks that are resistant to corrosion. Gas holder - a steel container for storing liquefied gas.

Installation of a gas tank in a private house

Installation of the tank is carried out in the following steps:

Excerpt of a pit for a tank.
Vibration compaction of the bottom and preparation of the concrete base.
Securing the container using steel cables and pins.
Installation of a condensate collector to the tank.
Installation of additional chemical corrosion protection.
Laying communications between the pit and the house.
Pressure testing of the gas supply system and backfilling of soil.

Rules and regulations for installing a gas tank on a summer cottage

Installation of gas equipment belongs to the category of high-risk work, and therefore must be performed by professionals, taking into account all rules and regulations. There are a number of rules for installing gas tanks, which are regulated by documents (SP 62.13330.2011, SP 42-103-2003, SP 31-106-2002, PB 03-576-03, 123-FZ).
For a summer cottage, tanks from 2,400 to 12,000 liters are used, depending on the volume of gas consumption.
The tank must be located at least 10 meters from a residential building, and at least 2 meters from the foundation of any non-residential building. The backfilled surface of the gas tank should not be concreted or planted with vegetation.
The pit must be at least 2 meters deep and wide.

You can buy a gas tank with installation by contacting our company. We have certifications and certifications for gas work and competitive prices for services. Our specialists will carry out the installation strictly according to technology in accordance with all regulatory documents.

The price of installing a turnkey gas tank in a private house

To find out the price, select the area of your home:

House up to 150m2 - boiler room design power - 25 kW.

YoLPG storage tank - REAL-INVEST2500l + installation + BOILER!!!

	Name	Price per unit, rub.	Qty	Cost, rub
*Equipment*
	LPG storage tank V=2.5m3 with high nozzles, with GOK pressure reducer
	(stove), delivery.		Set.
	Installation and excavation work	Standard kit
	Engineer visit
	Gas Japanese boiler RINNAI 24kW
Total gasification with boiler:		264 000

Note:






	Excavation		set
	Total additional equipment

Upon your request for autonomous gasification of your home, namely gasification of the following gas-consuming equipment:

House up to 300m2 - boiler room design power - 40 kW.

We have previously calculated and offer you the following configuration option: Yo4800l + installation + BOILER!!!

	Name	Price per unit, rub.	Qty	Cost, rub
*Equipment*

	Set of materials + reinforced concrete base(stove), delivery.		Set.
	Installation and excavation work the above autonomous gas supply system (tank fastening, underground gas pipeline up to 15 m, 1 entry into the house)	Standard kit
	Engineer visit
	Gas Japanese boiler RINNAI 24kW (maximum economical for LPG) + installation and conversion to liquefied gas
Total gasification:		288 000

Note: 1) At your request, it is possible to install additional equipment, for example:

	Additional base input DU32
	Additional underground gas pipeline DU32_
	Overhead and internal gas pipeline DU20_
	Gas analyzer with shut-off solenoid valve (necessary, since the boiler room is in the basement)
	Gas pressure stabilizer for the kitchen
	Excavation
	Total cost of turnkey gasification with additional equipment:

The gasification project, examination, coordination with authorities and state supervision, registration and general construction work (grounding, lightning protection, supports, fencing) for gasification of private houses at the request of the RTN authorities of the Russian Federation are currently not applied.

Excavation work is carried out by the customer or by a contractor according to the estimate determined by the engineer when visiting the site.

Waiting for your answer. The visit of an engineer to mark out the earthworks after the conclusion and payment of the contract is free.

Upon your request for autonomous gasification of your home, namely gasification of the following gas-consuming equipment:

House up to 450m2 - estimated boiler power - 50 kW.

We have previously calculated and offer you the following configuration option: YoLPG storage tank RIAL-INVEST 6800l+ installation + BOILER!!!

	Name	Price per unit, rub.	Qty	Cost, rub
*Equipment*
	LPG storage tank V=4.8m3 with high nozzles, with GOK pressure reducer
	Set of materials + reinforced concrete base(stove), delivery.		Set.
	Installation and excavation work the above autonomous gas supply system (tank fastening, underground gas pipeline up to 15 m, 1 entry into the house)	Standard kit
	Engineer visit
	Gas Japanese boiler RINNAI 24kW (maximum economical for LPG) + installation and conversion to liquefied gas
Total gasification:	336 000

Note: 1) At your request, it is possible to install additional equipment, for example:

	Additional base input DU32
	Additional underground gas pipeline DU32_
	Overhead and internal gas pipeline DU___
	Gas analyzer with shut-off solenoid valve (necessary, since the boiler room is in the basement)
	Gas pressure stabilizer for the kitchen
	Excavation
	Total additional equipment
	Total cost of turnkey gasification with additional equipment:

Excavation work is carried out by the customer or by a contractor according to the estimate determined by the engineer when visiting the site.

Waiting for your answer. The visit of an engineer to mark out the earthworks after the conclusion and payment of the contract is free.

Layout diagram

Gas holder is a container made of durable alloy of various shapes and volumes for storing gas. Typically, gas tanks are made of steel, treated with a protective coating on top and equipped with an antistatic voltage system.

An example of the location of a gas tank on a site

Such barrels are installed outside the home, which is safer, and are refilled no more than once a year. The cost of filling a gas tank is significantly lower than the price of gas from the main networks. A person easily uses a gas holder for heating, water heating, cooking and does not depend on the prices for servicing a gas organization.

Autonomous gas supply scheme

A fuel tank is a good alternative to gasifying a private home, especially where there are no centralized gas networks. The containers are usually filled with butane, methane, and sometimes mixtures of different gases. Most often, the procedure is performed in the summer, since it is at this time that the cost of blue fuel decreases. Many people abandon the idea of installing an autonomous system after seeing how much a gas tank costs. But don’t rush to conclusions, there are types of gas tanks that are not so affordable.

Main characteristics and features of gas tanks

Modern gas tanks differ from their industrial “counterparts”, first of all, in that the gas pressure in the tank is constant. Special automation is responsible for this - sensors and valves for measuring volume, pressure, filling and dispensing. Pressure indicators differ from atmospheric pressure and amount to 1.8 MPa. What is a gas tank and its operating principle:

After refueling, liquefied gas is supplied to the container.
The next stage is the evaporation of gas vapor.
Pressure forces gas to move through the pipes.

The shape of the gas tank is of fundamental importance! The larger the evaporation area, the better the gas is supplied to the system, which is why horizontal models are usually used.

Let's consider the principle of operation of a gas cat. In essence, this is a standard heat generator.

The principle of operation of a liquefied gas boiler

Heat is released in it by burning fuel. The heat exchanger heats up and transfers heat to the heating system pipes.

Types of gas tanks

So, according to the type of installation, gas tanks are:

Ground.
Underground.

Ground gas tanks can most often be found in enterprises. Their installation is simple, cheaper, and access for maintenance does not take much time. However, they are subject to temperature changes, and in some cases their use is impractical.

Scheme of options for installing a gas tank in production

Such systems are not suitable for autonomous gasification of a dacha or cottage:

They significantly spoil the appearance of the site.
Not protected from bad weather and frost.

Underground models are better suited for use in private homes.

Horizontal underground gas holder

IMPORTANT!

In regions where the lower temperature threshold in winter is below 20°C, it is preferable to install underground cylinders.

The depth to which the underground cylinder is installed varies in different regions - it depends on the depth of soil freezing. However, on average it is 60 cm. Such models, in turn, also differ in volume and type.

Vertical models

Such models are mainly used in areas of limited area. The diameter of the pit for such a gas tank is only 2.5 meters.

Vertical type gas holder on site

Vertical type gas holder installation diagram

On the other hand, the evaporation area also decreases, which means that the gas supply pressure in such networks may not be very high. Reviews regarding vertical gas holders are not so numerous. On some forums they write that vertical models are supposedly equipped with a special plastic casing. However, experts, answering questions, debunked this myth.

Review of a vertical gas tank in a plastic casing

Horizontal models

Unlike vertical models, horizontal models meet the main requirement - a large evaporation area. Such systems are characterized by high performance. They can be installed several at a time on a site.

An example of installing two horizontal gas tanks to one gearbox

Such systems double the volume of gas supplied to the living space. However, when the tank is emptied twice, the performance of the gas holder may drop. For this purpose, the system is equipped with an additional gearbox. Which gas holder is better to choose is up to you to decide.

Mini gas tanks

This type of gas holder is usually considered as an option for heating a country house. They can be installed both outdoors and indoors. Mini gas tanks for a country house are easy to transport (for example, for the summer). Usually they do not exceed a volume of 500 liters, but this is quite enough to easily get heat and hot water for the whole summer.

Mini gas holder 480 liters

And for regular cooking in a gas stove, the gas supply without refilling is enough for 2 years. For heating the house, the consumption will be significantly higher.

Mobile options

To refill mini-gas tanks, you need to invite a special service or take the cylinder yourself to the gas station. However, there is a more convenient option - mobile gas tanks. They are significantly larger in volume. In their design, they already have special wheels, and a fastening system for transportation is also provided. This will save a lot of money on calling a special team. To transport mobile cylinders on your own, you will need a small trailer with a winch.

Step-by-step instructions for refueling and transportation rules

Let us consider in detail the process of loading, refueling and transporting a gas tank of this type.

Photo	Actions
	With the help of a lifting mechanism, the gas tank is easily loaded into the trailer, and the wheels fit exactly into the grooves on the hinged lid.
	Using a winch, we pull the cylinder to the edge of the platform.
	The cylinder is located in a special metal box, which has special fasteners both front and back.
	It is important to tighten the fasteners on both sides. To do this, special holders are screwed into the corners of the trailer. The cylinder on such a spacer will be securely secured during transportation.
	We get to the nearest gas station and fill the tank.
	We go back and do all the procedures in reverse order. It is necessary to ensure that the wheels of the cylinder fit exactly into the grooves to prevent it from tipping over.
	Using a special hose, we connect the mobile gas tank to the distribution system.
	We cover the box with the gas holder with a protective film.
	Be sure to install a hood like this in your kitchen. IMPORTANT! Any gas system in the house requires reliable ventilation!
	As we can see, such mobile cylinders can easily provide heating for the heating system and boilers.

Users note that the design of such a mobile gas tank is more profitable than its mini version. Especially when you consider that many companies also offer a trailer along with a container on wheels.

Reviews of a mobile gas tank with a trailer

However, if gas consumption is high, then it is better to choose stationary equipment.

A stationary unit requires less maintenance effort and does not require additional costs after installation. Such equipment has greater efficiency and productivity.

IT IS IMPORTANT TO KNOW!

Compared to natural gas, liquefied gas in cylinders is more economical.

Before purchasing a gas tank, you need to decide on the following points:

Type of container.
Volume.
Economical.
Installation cost.

In order to get an idea of the approximate gas consumption you will need, you can make the following calculations. The standard consumption of liquefied gas for the heating season is 20 liters per 1 m². In other periods, the figure drops to 3.5 liters per 1 m². At the stage of selecting a gas tank, the company’s specialists will help calculate these parameters. Some of them offer calculators for calculating parameters, depending on the area of the house, the planned gas tank model, the cost of the first refueling and turnkey installation of equipment.

Example of a calculation calculator

Is it worth installing a gas tank for a private home? Reviews on the Internet say an unquestioning yes. Regardless of the type of gas tank, people are unanimous in their opinion - installing an autonomous system on the site is convenient and economical. There are hundreds of questions on specialized forums related to the quality and installation features of gas tanks from different companies. The most frequently asked questions and their answers are given below.

Which gas holder has the longest service life? In answer to this question, experts clearly note that it all depends on how well the installation was done.

Forum answer, question 1.

Some questions concern changes to the basic designs of gas tanks.

The craftsmen suggested a “Standard” gas holder and raising the reducer higher on the tube. That's the right decision?

Forum answer, question 2.

However, the most popular question concerned the choice of country of origin. And this is what the professionals answer.

Forum answer, question 3.

So you need to be very careful when choosing a gas tank. View reviews and read expert opinions.

Rating of gas tank manufacturers

Today there are literally several companies on the market that have successfully proven themselves. The rest are most often fly-by-night companies offering the same product, only with their own brand. Sometimes such “specialists” have nothing but a website.

Features of choosing models:

Imported gas tanks are made from thinner steel sheets, unlike domestic ones. However, foreign models are covered with an improved anti-corrosion coating.
Some gas tanks of foreign models are not suitable for filling with domestic gas due to the difference in filling nodes.
All models of gas tanks installed in Russia must have a certificate of conformity.
The “weak point” of Russian gas tanks is pressure gauges. They are made without safety valves and there is no overfill protection. Valves and flanges must be retightened regularly.
The service life of condensate collectors from domestic manufacturers of gas tanks is 15 years, in contrast to 50 years for foreign models made of polymer materials.

"Deltagaz"

The Czech company Deltagaz is a leader in sales of equipment for autonomous boiler houses in Europe. The manufacturer has its own design bureau, which allows it to introduce new engineering solutions, depending on market needs.

Underground horizontal gas holder of the Czech company Deltagaz

The company checks welded elements using a high-pressure method of 22 barrels. The wall thickness of different elements varies from 5 to 11 mm. And the maximum deviations are within the framework of the DIN 28005 standard.

"Kadatek"

The company “took” its niche in the market thanks to the installation of gas tanks with an enlarged neck. The design is highly durable, the sheet width is almost 6 mm.

Gas holder "Kadatek"

Before coating with a layer of epoxy resin, gas tanks must be sandblasted. The products are attractive due to their price-quality ratio.

VPS

This Czech brand has been known on the market of autonomous gasification systems since 2005. It has good corrosion protection due to the high quality of steel and protective coatings.

VPS gas holder for 10,000 liters

Supplied with high quality German fittings. The “planting” depth of the tank allows installation to a depth of up to 80 cm. If installed correctly, the service life is more than 50 years. "Chemet"

These Polish gas tanks, in addition to other “amenities”: a steel body, high-quality wall treatment, have electrochemical anti-corrosion protection.

Gas tanks "Chemet-Premium"

"City-gas"

Manufacturer from Bulgaria. An excellent solution for different buildings - from small country houses to suburban ones.

Gas tanks of the Bulgarian company City-Gaz for the Russian market - volume and productivity

One of the few suppliers that produces small volumes of containers - from 2700 liters. The walls are made of high-strength polymers, which provides good protection against corrosion.

Russian gas tanks RP and RPG

One of the undeniable advantages of domestic producers is low prices. However, the quality of domestically produced products leaves much to be desired. Almost all manufacturers use 09G2S steel, which does not have durable anti-corrosion properties. To slow down the corrosion of such a gas tank, it is necessary to carry out electrochemical protection measures. And this is an additional consumption of electricity. So the potential efficiency of such gas tanks will ultimately result in unnecessary expenses.

Turnkey autonomous gasification, list of works, prices

The price of a gas tank for a private home depends on the service package you purchase, as well as on the volume of the gas tank.

The cost of turnkey work depending on the list, type of gas tank and its volume using the example of the companies City-Gaz and VPS

Typically, the standard package of services includes: delivery of a gas tank and a concrete slab under the base, shut-off valves, pressure regulator, gas pipes. Installation, checking and testing of main equipment.

Standard and additional list of equipment for VPS gas tanks

For an additional fee, specialists can dig a pit, install a container for collecting condensate, electrochemical protection systems, as well as perform grounding and installation of a lightning rod. Thus, the price of a turnkey gas tank for a private house in the minimum version will be about 250 thousand rubles.

Gas consumption for heating a house from a gas holder

The price of fuel for the boiler is of paramount importance. Information on gas consumption can be found in the instructions for the gas tank. Usually, the footage of the house is taken into account and the total area is divided by 10. The resulting figure will determine the required power for the operation of the equipment. And it is already determined by the volume of the gas tank and the choice of fuel.

Frequently asked questions about the autonomous gasification system:

An autonomous gas supply system is in demand in places remote from the central gas pipeline. It is often ordered by owners of dachas, country houses and cottages, residents of remote houses and small enterprises located on the outskirts of cities.

Today, building a gas pipeline is very expensive, plus you need to pay for the gas supply project for the facility, and this can take more than one month. Therefore, some people decide to “get” their own gas supply system. How much time does it take? From submitting an application to creating a project and putting autonomous gasification into operation, it can only take about one week and you have gas at home. And in terms of finances, it can be much cheaper than connecting to a central gas pipeline. But perhaps you want to understand more about all this, let's do it now.

Private gasification is its own system not connected with any other types of communications. It consists of a tank or gas tank where fuel is stored. The capacity is selected depending on consumption, but more on calculations later. Further, the composition includes pipes, alarm sensors, a leak and accident warning system, end consumers: gas boiler, stove, water heater, convector.

Gas into the house to the boiler (stove, water heater, etc.) comes from a gas tank, so the amount of fuel depends on the volume of the tank, so in order to have enough of it, an accurate and correct calculation is needed. You can add 20% to the result for “any fire emergency.” Suddenly the winter turned out to be colder, the children brought their grandchildren on vacation and the heating needs to be turned on more, which means that the consumption may not have been planned to increase. When the fuel runs out, you can order it from a company that supplies liquefied gas; a car will come and fill the gas tank. So, let's see how the tank is calculated. Gas consumption for the premises costs approximately 21 liters. per sq. m. If you have a house of 100 sq. m. m., which means you need a gas tank with a capacity of 2100 liters, add 20% here, the volume comes out to 2520 liters.

It is important to know that gas is not filled to full capacity, but to 85% of the total capacity. Take another factor into account, if the car's filling tank is delayed by weather conditions for one or two days, then a small supply can play an important role. It turns out that if you install a gas tank for 2500 - 3000 l. It will be enough to refill it only once a year.

When choosing a gas boiler, the main indicator will be power. It depends on many indicators, such as the area of the house, how insulated it is, namely the roof, floor, walls. What is the height of the ceiling, the preferred temperature (some people like 18 degrees, while others like to walk in shorts and feel comfortable at 28 degrees). It is best to call a specialist from a company that sells boilers or installs autonomous gas supply systems, and he will make the correct calculation. This is important; if the calculation is incorrect, the power may not be enough, and therefore the room will be cold. In contrast, purchasing a boiler with significantly more power than needed is costly, you will overpay, and the more powerful the unit, the more it usually consumes.

To simply determine the boiler power, use the following formula:

P=S∙Pp/10

>What do these numbers mean?